NOVA3D Water Washable UV Resin White 1000ml

NOVA3D Water Washable Resin

Great Point

• Good fluidity:

Low viscosity，good fluidity makes it easy to separate the cured resin from the uncured one. Reduce the printing time, improve the success rate on printing.

• Low odour:

Comparing with the standard resin, the water washable resin is much less odour.

• Water washable:

The model is washable in water or water flow. No residue after washing.

• High efficiency:

It takes less time to cure the resin, time-saving and increasing the efficiency.

• High safety:

No necessary to use alcohol or other industrial solvents, Effective to avoid cleaning solvents to the body caused damage.

• High success rate on printing:

Appropriately 99%

• High detailed:

Smooth surface after cured. Highly detailed.

• Compatibility:

Compatible with most 395-410nm MSLA printers on the market. 

• Fresh colour and fadeless:

Fresh colour, fadeless, not easy to turn yellow.  

• Easy to remove:

Cured model is easy to remove and reducing the possibility of breaking the plate or model when removing it.

• Wide implication field:

Architecture, jewellery, dentistry, animation, daily life etc. Different scenario of use.

Specifications

Bending modulus                                          1.882-2.385Mpa

The bending strength                                    40-70Mpa

Thermal deformation temperature                 80℃

Coefficient of thermal expansion                   95*E-6

Volume shrinkage                                          3.72-4.24%

Line shrinkage                                               1.05-1.35%

The tensile strength                                       30-52Mpa

Tensile rate                                                    1.779-2.385Mpa

Hardness                                                       80-85D

Vitrification temperature                                 100℃

The density of                                                1.05-1.25g/cm³

Notch impact strength                                    41-48j/m

Wide Compatibility

• Nova3D washable resins are applicable to most 395nm-405nm 3d printers.

About NOVA3D:

• Founded in 2016, Nova3D is a high-tech enterprise integrating 3D printer R&D, sales and service, and has established its own brand Nova3D.
• At present, Nova3D is mainly engaged in developing LCD 3D printer and 3D printing resins, devoting to bringing the users with better 3D printing experience.
• Nova3D has always been adhering to the principle of simple-to-operate, and will move on to make consistent efforts for every creator to “print what you want”