Clipsal Smoke Alarm Isolation Unit | 756

The Clipsal 756 Smoke Alarm Isolation Unit is a device which connects to the Firetek 755 Smoke Alarm range and provides a set of isolated
changeover contacts permitting auxiliary devices such as sirens, strobes and/or security systems to be enabled when the 755 Smoke Alarm is in the alarm state.

The Clipsal 756 Smoke Alarm Isolation Unit is capable of operating correctly in the absence of mains supply and derives its power from the
Smoke Alarm only when the Smoke Alarm is in the alarm state.

The 756 may also be used to provide connection of the Smoke Alarm output to the Clipsal C-Bus®, Clipsal HomeSafe Security Systems or Emergency Lighting.

• Changeover Contacts: 1 x Normally Open (N.O.), 1 x Normally Closed (N.C.)
• Contact Rating: 10 A resistive and inductive, 250 V AC, 50 Hz
• Interconnection Input: 6 V to 10V DC. referenced to Neutral
• Supply Current: Alarm mode - 1mA minimum. Non-alarm mode (standby)
• Maximum number of smoke alarms interconnected to a single 756 Isolation Unit: 40
• Switching Delay: 20 seconds
• Cables Accommodated: 2 x 2.5 mmsq
• Clipsal Smoke Detectors, Smoke Alarm Isolation Unit compatible with Clipsal Smoke Detectors only.