Ubiquiti Unifi Access G3 Intercom (UA-G3-Intercom)

Ubiquiti Unifi Access G3 Intercom (UA-G3-Intercom)

Ubiquiti UniFi Access Intercom with Camera and Keypad. UniFi Access Intercom is an indoor or outdoor intercom terminal for managing residential and commercial building entry requests with Touch Pass support.
- Unlock using Apple Wallet or an NFC card or UniFi Identity mobile app, face unlock and Touch Pass
- Directory and doorbell to request entry
- Pairs with multiple UniFi Intercom Viewers for remote access control
- Connects to UniFi Access Hub series using PoE
- Weatherproof (outdoor exposed 30 to 60° C)
10 free 1-year Apple Touch Passes included


Deployment

Overview
Dimensions
324.8 × 113.7 × 28.3 mm (12.8 × 4.5 × 1.1”)
Integrated Camera
Yes
NFC Card & Keyfob Access
Yes
PIN Access
Yes
Apple/Google Wallet
Yes
Mobile Unlock
Yes
Two-Way Intercom & Doorbell Access
Yes
NDAA Compliant
Yes
UL 294 Level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
Weatherproofing
IP65
Mechanical
Weight
Device: 965 g (2.1 lb)
Bracket: 445 g (1 lb)
Enclosure Material
Aluminum alloy, UV-stabilized polycarbonate, glass
Mount Material
Powder-coated stainless steel
Mounting
Wall mount, adapter to the gooseneck pedestal (Included)

Hardware
Indoor and Outdoor Use
Yes
Ambient Operating Temperature
Device: -30 to 60° C (-22 to 140° F)
Display: -25 to 60° C (-13 to 140° F)
Ambient Operating Humidity
5 to 90% noncondensing
Networking Interface
(1) GbE RJ45 port
Connectivity
BLE 4.2, NFC
Power Method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Max. Power Consumption
13W
Supported Voltage Range
48V DC
Sensors
Proximity sensor, ALS sensor
Display
177 mm (7”) diagonal
Touch Screen Technology
Capacitive multi-touch
Display Luminance
Max. 1000 nits (Typical)
Screen Orientation
Portrait
Resolution
1024 × 600 px
Microphone
Yes
Speaker
Yes
NFC Frequency
13.56 MHz
NFC Read Range
< 30 mm (1.18’‘)
NFC Technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
LEDs
Amber
Buttons
(1) Factory-reset
PoE Cabling Requirements
Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
UL 294 Statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
CAN/ULC-60839-11-1 Grade
Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-G3-Intercom, V01
Software
Management Application
Access
Software Information
The software version can be checked at https://unifi.ui.

Please note that this item is located outside Australia. Product complies with Australian standards.