Bambu Lab A1C 3D Printer with AMS Lite Multi-Colors Combo Pack Up to 500mm/S -

Bambu Lab A1C 3D Printer with AMS Lite Multi-Colors Combo Pack Up to 500mm/S – Build Size 256 × 256 × 256 mm – Automatic Material System – Multi-Colors / Materials Capability

Bambu A1 Combo Unboxing Guide


NOTE: The A1 series printers can only be connected to ONE AMS lite, so it can only support 4-color printing at most.
Bambu Lab A1 3D Printer
- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
- The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.

Why Choose Bambu Lab A1


Multi-color Printing – The most reliable multi-color system


Full-auto Calibration – You don’t have to do ANY manual tuning


Large Print Volume – Print a helmet in 1-piece


1-click to Print – As easy as your copier


Reliable High Speed – Finish your project on time, everytime


Active Flow Control – Smooth surfaces, sharp edges

Full-auto Calibration
Absolutely Hassle-free
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
AMS Multi-color Printing
The Most Reliable Multi-color System
The AMS lite has been recognized as the most reliable multi-color 3D printing solution. It also features RFID-sync to automatically match the best print settings for your Bambu filaments, delivering perfect print quality without manual tuning of the filament profile.
High-speed Precision
The High-speed You Can Truly Rely On
A1 is equipped with low-drag linear rails, a powerful MCU,accelerometers, a nozzle pressure sensor, and an advanced motion control system that maximizes their potential. Its high-speed performance is built on a solid foundation, ensuring consistent reliability with stable and uniform output for every print.
Intelligent Print Monitoring
Put Your Printing On Autopilot
3D printing is a complex task where many things can go wrong. The A1 is equipped with a comprehensive print status monitoring system to help keep the print job in check.
Full-size Print Volume
Generous Space for You to Expand Your Fantasy
A1 features 256mm*256mm*256mm build volume, bigger than most of the entry-level printers. Print a helmet in one go, we got you.
Connected with Privacy in Mind
Start & Control on Whatever Device You Prefer
Not only can you connect your A1 to any device you prefer through Bambu Cloud Service, but you can also do so through LAN-only mode. We offer fully customizable connection options to match your privacy preferences.

Body
Build Volume(W*D*H)
256*256*256 mm
Toolhead
Hot End
All-Metal
Nozzle
Stainless Steel
Max Hot End Temperature
300 C
Nozzle Diameter
0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
Heatbed
Build Plate
Bambu Textured PEI Plate (Included)
Bambu Smooth PEI Plate
Bambu Dual-Texture PEI Plate
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build Plate Temperature
100C
Speed
Max Speed of Tool Head
500mm/s
Max Acceleration of Tool Head
10000mm/s
Supported Filament
PLA, PETG, TPU, PVA
Ideal
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer
Not Recommended
Sensors
Chamber Monitoring Camera
Low Frame Rate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out Sensor
Yes
Filament Odometry
Yes
Power Loss Recover
Yes
Filament Tangle Sensor
Yes
Physical Dimensions
A1 Combo
Package size 560*540*430 mm , Gross weight (AMS lite included) 13.5 kg

Please note that this item is located outside Australia. Product complies with Australian standards.