Audio-Technica LP70XBT-WS Fully Automatic Bluetooth Turntable - White/Silver

Audio-Technica LP70XBT-WS Fully Automatic Bluetooth Turntable – White/Silver

The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.
Easy to Use
Equipped with Bluetooth wireless technology for simple connection to powered speakers and headphones, the AT-LP70XBT plays 33? and 45 RPM records automatically at the press of a button. And since the J-shaped tonearm features an integrated AT-VM95C cartridge there’s no installation, balancing or other tonearm setup required.
Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.
Complete Your Setup
The AT-LP70XBT can be connected to Audio-Technica’s AT-SP3X powered bookshelf speakers via Bluetooth wireless technology or the included RCA cable for an easy-to-manage sound system that fits in any room and requires no external amplifier.





AT-LP70XBT Setup
Fully Automatic Wireless Belt-Drive Turntable
Step by step setup instructions

Motor
DC motor
Drive Method
Belt-drive
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Die-cast aluminium
Wow and Flutter
< 0.25% (WTD)
Signal-to-Noise Ratio
> 55 dB
Cartridge Type
This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed.
Output Level
PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
LINE: 252 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain
36 dB nominal, RIAA equalized
Power Consumption
1.6 W
Dimensions
400 mm (16”) x 330 mm (13”) x 110 mm (4.3”) (W x D x H)
Weight
Approx. 2.9 kg (6.4 lbs)
Accessories Included
- Dust cover
- Felt mat
- Platter (with drive belt)
- Dust cover hinges
- 45 RPM adapter
- RCA audio cable (Approx. 1.0 m (3.3’))
- AC adapter (Approx. 1.5 m (4.9’))
AC Adapter
Type: FJ-SW1261200500DN
Rated Input Voltage: 100 to 240 V AC
Rated Input Current: 0.4 A max.
Rated Frequency: 50 Hz / 60 Hz
Rated Output Voltage: 12 V DC
Rated Secondary Current: 0.5 A
Cable Length: Approx. 1.5m (4.9’)
Effective Arm Length
220 mm (8.7”)
Overhang
18 mm (0.71”)
Tracking Error Angle
Less than 2.0°
Replacement Stylus
AT-VMN95C (sold separately)
Replacement Belt
AT-LP70X exclusive belt (sold separately)
Communication System
Bluetooth version 5.2
Frequency Band
2.402 GHz to 2.480 GHz
Maximum RF Output
2.5 mW EIRP
Maximum Communication Range
Line of sight – approx. 10 m (33’)
Modulation Method
GFSK, Pi/4DQPSK, 8DPSK
Compatible Bluetooth Profile
A2DP
Support Codec
Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC
Notes
*The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer.

For product improvement, the product is subject to modification without notice.

Please note that this item is located outside Australia. Product complies with Australian standards.