SeaHawk Thermostat Controller - 2400W | 15A | Hot & Cold 0 - 50 Degrees

Purpose:  To maintain grow room temperature. Unit can be hanged on to wall with hook provided at the back.  Thermostat has 2 meter capillary with sensing bulb at the end. This sensing bulb should be located at the spot where temp needs to be maintained.  

Heating Mode: Use this thermostat for heating where room temperature is normally below required temperature.  Set temperature on the dial (say 22 Deg) below which heater connected to heating socket on unit will be ON and stop when temp reach above set point.

Cooling Mode: Use thermostat for cooling where room temperature is normally high and need to maintain temperature by using cooling fans . Set temperature on dial (Say 24 DEG) above which cooling fan connected to cooling socket on unit will be ON and stop when cooling temperature is below set point.

 

Specifications

• Model: 8862 Mechanical Single Set Point
• Temp. Range (°C): 0 ~ 50
• Differential: 4±2 Deg
• Output: Heating or Cooling Sockets 2400W Max
• Electrical Rating: 15 A 240 V 50 Hz

• Capillary
  • Length: 2000 mm
  • Material: Steel

What’s in the Box

¹ x Sea Hawk Thermostat Controller – 2400W | 15A | Hot & Cold 0 – 50 Degrees