Bluelab Replacement pH Probe w/ 5M Cable - for Guardian Monitor & Combo & pH Meter

A replacement probe for Bluelab Combo and pH Meters as well as the Bluelab Guardian Monitor.

The Bluelab pH Probe is a replacement pH probe (electrode) suitable for use with Bluelab products that test the pH value of a solution.

Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life.

The Bluelab pH Probe has a double junction reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free.

Replace only the pH probe, not the whole meter!

Features

• Easy to clean
• Gel filled (non-refillable), low maintenance
• Double junction
• Waterproof cable joint
• Probe holder included – keeps probe secure
• Quality BNC connection
• 2 meter / 6.56 foot standard cable 

Specifications

• Measurement Range: 0.0 – 14.0 pH
• Accuracy at 25̊C / 77̊F: ± 0.1 pH
• Reference: Double junction Ag / AgCl, Sat. KCI gel
• Operating Environment: 0 – 60 ̊C / 32 – 144 ̊F
• Calibration: Not required for conductivity. pH requires two point, pH 7.0 & pH 4.0 or pH 10.0 calibration
• User Manual Languages Available: English; Espan҃ol; Français; Nederlands; Deutsch
• Cable Length: 5M
• Six month free repair or replacement guarantee.

What's in the Box

• [1] x Bluelab Replacement pH Probe w/ 5M Cable