LED Digital Display AC 100~300V Voltmeter 0-50A Ampere Meter (Red blue)

Feature:

1. 100% and high-quality.

2. Split-type: easy to install, the transformer is separated from the instrument, and the transformer can be installed according to the actual position of the measurement. (It can lengthen the lead at the second end of the transformer to reach the ideal ins

3. Two-wire system: No need to connect the power supply, red and black lines to measure the voltage at the same time to the meter head power supply (no need to split polarity).

4. t testing requires no additional purchase of transformer. The instrument is equipped with a high precision transformer.

5. In the watch head, l-set fine-tuning potentiometer can calibrate the voltage and t error by itself.

Specification:

Features:

100% and high-quality.

Split-type: easy to install, the transformer is separated from the instrument, and the transformer can be installed according to the actual position of the measurement. (It can lengthen the lead at the second end of the transformer to reach the ideal installation position).

Two-wire system: No need to connect the power supply, red and black lines to measure the voltage at the same time to the meter head power supply (no need to split polarity).

t testing requires no additional purchase of transformer. The instrument is equipped with a high precision transformer.

In the watch head, l-set fine-tuning potentiometer can calibrate the voltage and t error by itself.

Specification:

The range of voltage measurement AC100V – 300V

The range of t measurement 50A(0.00~49.99A)

Display mode 0.39 bright LED digital tube

Display color red + blue

Measurement accuracy 1% ± 2 digits

Display 0.39 inches LED digital tube display

Measurement speed about 2 times per second

Dimensions 70 * 40 * 30 mm

Installation dimensions 68 * 38 mm

Power supply line, measuring line length about 150mm

“split” transformer lead length about 100mm

Working temperature -10 ~ + 50 ℃

Working humidity 10 ~ 80% (without condensation)

Working pressure 80 ~ 106 kPa

Sunshine No direct exposure

Package List:

1 * t voltmeter head

1 * mutual inductance coil

1 * adapter

Note:

The wg sequence of the instrument is: the circuit of the t loop is connected first, the 220V voltage is finally connected, after connecting the 220V power supply, it can not touch any parts and circuits behind the instrument to prevent the danger of electric shock.

Split: Green terminal is connected to AC transformer CT, two yellow lines are connected to measure AC voltage, do not connect wrong, connect wrong will cause instrument damage, the responsibility is self-conceited.

This meter is designed based on the principle of tance step-down, because the higher the frequency, the smaller the impedance of the tor, so it is not suitable to be used in high-frequency electronic speed regulation, non-city electric sine wave frequency, or other occasions where there are high-frequency components, otherwise it is easy to burn down!

When selecting the range, the larger the range is, the greater the range is, the greater the error is. It is suggested that 1.5 times the actual test value be.

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.