Earn 1 Qantas Point per $2
Sold by BalancedDeals
~Use the discount code “FIRST” to reduce the current website prices of eligible products by 5% at checkout. Discount cannot be used in conjunction with other promotional offers. Kogan.com has millions of items available for sale, and some current website prices may change while this offer is available, and/or may have changed recently. Promotion applies to prices at time of checkout, as displayed at checkout. Eligible products are only available while stock lasts. Discount is applicable for Kogan FIRST customers only. For a list of eligible products, click here. The discount code “FIRST” will expire at 11:59PM (AEST) 20 APRIL 2026 unless extended. Discount codes cannot be used in conjunction with any other offers. For instructions on how to redeem a discount code, click here.
SMC30 Sensor Module Cabinet-Mounted
SINAMICS SMC30 Sensor Module For incremental encoder: TTL/HTL or combi-encoder SSI with incremental tracks or encoder SSI without incremental signals/ without DRIVE-CLiQ cable 30 mm overall width
The SMC30 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC30.
The following encoder signals can be evaluated:
- Incremental encoders TTL/HTL with/without open-circuit detection (open-circuit detection is only available with bipolar signals) (1)
- SSI encoder with TTL/HTL incremental signals
- SSI encoder without incremental signals
The motor temperature can also be sensed using a PTC thermistor KTY84‑130, Pt1000, or PTC.
(1) The Pt1000 sensor is not supported when combined with a Control Unit CU305.
Design
The SMC30 Sensor Module Cabinet‑Mounted features the following connections and interfaces as standard:
- 1 encoder connection including motor temperature sensing (KTY84‑130, Pt1000, or PTC) either via SUB-D connector or via terminals
- 1 DRIVE-CLiQ interface
- 1 connection for the electronics power supply via the 24 V DC supply connector
- 1 PE/protective conductor connection
The status of the SMC30 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.
The SMC30 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).
The maximum encoder cable length between SMC30 modules and encoders is 100 meters. For HTL encoders, this length can be increased to 300 meters if the A+/A- and B+/B- signals are evaluated and the power supply cable has a minimum cross-section of 0.5 mm².
The signal cable shield can be connected to the SMC30 Sensor Module Cabinet‑Mounted via a shield connection terminal, e.g., Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used as a strain relief mechanism.
Integration
SMC30 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.
Technical specifications
- Model: 6SL3055-0AA00-5CA2
- Current requirement, max. at 24 V DC, without taking encoder into account: 0.2 A
- Conductor cross-section, max.: 2.5 mm²
- Fuse protection, max.: 20 A
- Power loss, max.: 10 W
Encoders which can be evaluated
- Incremental encoder TTL/HTL
- SSI encoder with TTL/HTL incremental signals
- SSI encoder without incremental signals
Input current range TTL/HTL: 4 … 20 mA (typical 10 mA)
Encoder supply: 24 V DC / 0.35 A or 5 V DC / 0.35 A
Encoder frequency, max.: 500 kHz
SSI baud rate: 100 … 1000 kBaud
Limiting frequency: 500 kHz
Resolution (absolute position SSI): 30 bits
Cable length, max.:
- TTL encoder: 100 m (328 ft) (only bipolar signals permitted)
- HTL encoder: 100 m (328 ft) for unipolar signals, 300 m (984 ft) for bipolar signals
- SSI encoder: 100 m (328 ft)
PE connection: M4 screw
Dimensions:
- Width: 30 mm (1.18 in)
- Height: 150 mm (5.91 in)
- Depth: 111 mm (4.37 in)
Weight: approximately 0.45 kg (0.99 lb)
This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.
All products sold by third-parties are subject to the Kogan Guarantee. For more details click here.
Save with Kogan FIRST
Save $13.05 on non-member price
Earn $4.22 Rewards Credit
Earn $250 in vouchers°
Earn double Qantas Points.†
^FREE 14 day trial. Kogan FIRST will be charged $129 / 365 days after free trial, cancel anytime. T&Cs apply, click for details.
Free Shipping
Leaves warehouse in 1-2 business days