Portable Fine Quality Graphical Transistor Tester Diode Triode Scr Capacitance Inductance Transistor Tester

Description:
One -button operation, automatic shutdown, only 20nA shutdown current.
Automatically detect NPN, P-NP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, two diodes, thyristors small power unidirectional and bidirectional thyristor.
Automatic identification c-omponents pin arrangement.
Measuring bipolar transistor current amplification factor and base-emitter threshold voltage.
Via the base-emitter threshold voltage and high current amplification factor to identify Darlington transistors.
Can detect bipolar transistors and MOS transistors protections diodes.
Measuring the gate MOS FET threshold voltage and the gate capacitance.
Can simultaneously measure two resistors and resistor s-ymbol is displayed. Displayed on the right with a decimal value of 4. Resistance s-ymbol on both sides shows the pin number. So you can measure the potentiometer. If the potentiometer wiper is not transferred to an extreme position, we can distinguish the middle and both ends of the pin.
Resistance measurement resolution is 0.1 ohms, 50M ohms can be measured.
Can measure capacitance of 30pF-100mF, resolution 1pF.
2uF more capacitors can simultaneously measure the equivalent series resistance ESR values. The two can be displayed with a decimal value, resolution 0.01 ohms.
Can be in the correct order and the diode s-ymbol display two diodes, and gives the diode forward voltage.
LED is detected as a diode forward voltage higher. Combo of the LED is identified as two diodes.
Eeverse breakdown voltage is less than 4.5V Zener diode can be identified.
Can measure a s-ingle diode reverse capacitance. If the bipolar transistor connected to the base and collector or emitter of a pin, it can measure the collector or emitter junction reverse capacitance.
Can be obtained with a s-ingle measurement rectifier b-ridge connection.
Use 12864 LCD display with green backlight.

Test ranges: inductors, capacitors , diodes, dual diode, mos, transistor, SCR , the regulator, LED tube, ESR, resistance, adjustable potentiometer.

Specifications:
Stand by current: 2mA
LCD: 128 * 64
Battery: 9V battery (not included)
Resistance: 0.1 ohm resolution, maximum 50M ohm
Capacitor: 25pf -100,000 uf
Inductors: 0.01mh-20H
Package size: 71 * 63 * 60mm / 2.8 * 2.5 * 2.4in
Package weight: 50g / 1.8ounce

Packing List:
1 * Transistor Tester