Temperature Humidity Transmitter High Accuracy Wall Mounted Meter Sensor 0~10V og

Feature:
1. STABLE AND SMALL: The sensor adopt high accuracy temperature and humidity measurement unit, possess long term stability and small size
2. WIDE RANGE: Using a dedicated og circuit, the use range is wide, come with 10~30V wide voltage range power supply, very practical
3. WALL OR RAIL MOUNT: Temperature humidity transmitter is easy to install, support wall mounted or rail mounted, possess IP65 high dust resistance, rain and snow protection with good breathability
4. INDUSTRIAL GRADE CHIPS: The circuit adopts industrial grade microprocessor chips and imported high accuracy temperature and humidity sensors to ensure excellent reliability, high accuracy and interchangeability
5. CONNECT TO VARIOUS EQUIPMENT: Adopt standard industrial interface 0~10V og signal output, can be connected to on site digital display, PLC, inverter, industrial control host and other equipment, safe and reliable, possess beautiful appearance, easy installation

Specification:
Item Type: Temperature Humidity Transmitter
Product Size: Approx. 147 × 88 × 41mm / 5.79 × 3.46 × 1.61in
Dust Proof Protection Grade: IP65
Power Supply Wg: Wide voltage 10~30V DC power input, for 0-10V output devices, only 24V can be used
Output Interface Wg: The standard configuration of the device is to have 2 independent og outputs
Material: ABS
Weight: 157 g / 5.5 oz(approx.)
Specific Wg:
ItemCircuit identificationDescription
Power supplyVCCPositive power
GNDNegative power / negative signal
OutputTHPositive temperature signal
RHPositive humidity signalParameter:
DC power supply (default) DC 24V
Maximum power consumption t output 1.2W
Voltage output 1.2W
A accuracy Humidity ±2%RH(60%RH, 25℃)
Temperature ±0.4℃(25℃)
B accuracy Humidity ±3%RH(60%RH,25℃)
Temperature ±0.5℃(25℃)
Temperature range -40℃~+120℃,default -40℃~+80℃
Humidity range 0%RH-100%RH
Transmitter circuit working temperature and humidity -20℃~+60℃, 0%RH~95%RH(non condensing)
Probe operating temperature -40℃~+120℃, default-40℃~+80℃
Probe working humidity 0%RH-100%RH
Long term stability Humidity ≤1%RH/y
Temperature ≤0.1℃/y
Response time Humidity ≤8s(1m/s wind wpeed)
Temperature ≤25s(1m/s wind wpeed)
Output signal Voltage output 0~10V
Load ty Voltage output Output resistance≤250Ω
t output ≤600Ω
Hole Size Approx. 70mm / 2.76in
Parameter settings Modify directly through software settings or buttons Product Selection:
RS- Other standards
WS- Temperature humidity transmitter sensor
V10- 0~10V voltage output Common Problems and Solutions:
No Output or Wrong Output Possible Causes:
1. The wrong range corresponds to the PLC calculation error. For the range, please refer to the technical specifications in the first part.
2. The wg method is incorrect or the wg sequence is wrong.
3. The power supply voltage is incorrect.(24V power supply for 0-10V type)
4. The distance between the transmitter and the collector is too long, causing signal disorder.
5. The PLC acquisition port is damaged.
6. Equipment damage.

How to Use:
Installation Method:
1. Wall Mounted Installation: There is a slide rail mounting plate on the back of the transmitter, remove the mounting plate first. There are two expansion plugs and two self tapping screws in the accessories. First punch two holes with a diameter of 5mm and a depth of ≥30mm on the wall (the hole spacing is 70mm). After inseng the expansion plug, fix the slide rail mounting plate on the wall with self tapping screws, and finally slide into the transmitter.
2. Sliding Rail Installation: There is a slide rail mounting plate on the back of the transmitter, remove the mounting plate first. The transmitter slides directly into a standard 35 rail.

Package List:
2 x Screw
2 x Wall Plug
1 x Transmitter
1 x User Manual

Note:
1. 24V power supply for 0‑10V type.2. The device does not provide communication line by default, the line color is for reference only.