Pond Automatic Fish Feeder Timer Turtle Koi (8 Version)

🔸 10L Large ty | Long-Term Feeding for 30+ Days
Based on twice-daily feeding of 150g per feeding, this device can sustain feeding for over a month, eliminating the need for frequent refills and making it suitable for long-term use in fish ponds and landscape pools.

🔸 Intelligent Timed Feeding | 24-Hour Adjustment
Customizable feeding times and frequency allow precise control of daily feedings, fostering a feeding pattern and preventing missed or overfeeding.

🔸 Three-Level Feed Adjustment | Adapts to the needs of different fish populations

S Baffle: 15-20g/second (Small Fry/Cautious Feeding)

M Baffle: 20-25g/second (Regular Fish)

No Baffle: 30-38g/second (Large Fish/High-Demand Applications)
Use the “FEED+SET” button to ly adjust the feeding time from 1 to 60 seconds, flexibly meeting diverse feeding needs.

🔸 Waterproof and moisture-proof design | Upgraded brim structure
The feed port’s special sealing structure effectively isolates rain and moisture, preventing feed from clumping and spoiling, making it safer for outdoor fish ponds.

🔸 Rodent-proof design | Suspended feed protection
It is recommended to install the feed port above the water surface to reduce the possibility of rodents stealing food and protect fish feed .

🔸 Widely applicable
This device covers all large and medium-sized water bodies, including villa courtyard landscape pools, professional fish farms, outdoor fish ponds, and park pools.

Instructions
Local Time Setting
Open the battery cover and insert four AA alkaline batteries into the battery compartment (do not use rechargeable batteries).
The LCD will display ——, indicating that the feeder is ready for local time setting.
To set the local time, press the “SET” button once. The clock will begin flashing. Press the “” button to set the hour. Press the “SET” button again. The minute will begin flashing, indicating that the minute is set.
Feeding Time Setting
Press the “FEED” button. The LCD will display ——, followed by the number 1 at the top of the display, indicating that the first feeding time setting is set. (Each feeding requires two settings: the first setting is the feeding time, and the second setting is the feeding time in seconds.)
Press the “SET” button. When the clock begins flashing, press the “” button to set the hour. Press the “SET” button again to set the minute. Press “SET” a third time to confirm the feeding schedule. Press the “FEED” button, and the LCD will display “-:01.” Press the “” button to set the number of seconds (from 1 to 60 seconds) for Level 1 feeding.
Press the “FEED” button again to enter Level 2. Repeat steps 1 and 3 and 4.
You can check the programmed feeding schedule by pressing the “FEED” button. Each press of the “MANUAL” button (manual mode) allows manual feeding outside of a pre-programmed feeding schedule. The display will flash with “seconds” as you press it, allowing you to test the feed rate per second. To c a programmed feeding schedule, press the “FEED” button, select the time slot you want to c, and then press the “” button once. The number on the LCD will disappear. To restore a feeding schedule, select the time slot you want to restore and repeat step 6. The feeder will resume feeding at your previously set schedule.

●New batteries typically provide three months of continuous operation. If the LCD displays “LO,” replace the batteries as soon as possible.
●Prevent the feeder from being dropped into water. Always keep the lid securely closed to prevent moisture from entering the timer and feed box. Always keep the feed box clean and dry, removing any moisture and spoiled feed.
●Note: This product is designed for pellets with a diameter of 2-9 mm.

The eight-time version represents the upper limit of the number of times the timing is performed in 24 hours a day

Includes: One feeder + instruction manual(Batteries not included in delivery)