DSO-TC4 3-in-1 Digital Oscilloscope - Transistor Tester & Signal Generator

DSO-TC4 3-in-1 Digital Oscilloscope Transistor Tester 10M Bandwidth Signal Generator 10MHz 48Ms/s Ocsillscope Automatic LCR Test Tool

Product Description:
Support 13 kinds of waveform outputs, frequency range from 0 to 50 KHz, output voltage adjustable range from 0 to 3V.
Output parameters (frequency, amplitude, duty cycle) adjustable, flexible to meet different needs.
High efficiency: Automatically identifies the type of component under test and the pin layout components, simplifying the operation process and improving the testing efficiency.
Variety of categories: Detect and yse the performance and characteristics of semiconductor components, such as transistors, diodes
Detect and yse the performance and characteristics of semiconductor components such as transistors, diodes, triodes, field effect tubes (FETs), etc.
Portable design: Equipped with a 2.8-inch TFT colour display for clear and intuitive images
Built-in high-ty rechargeable lithium battery (1500 mAh), standby time 4 hours
Compact and lightweight, suitable for mobile use
The -DSO-TC4 is designed to provide users with powerful and flexible functions and a portable operating experience, making it an ideal tool for maintenance and R&D work.

Product Overview
Product Description The DSO-TC4 is a multi-functional transistor oscilloscope from , designed for the maintenance and R&D industries with a comprehensive range of features and practicality. It integrates an oscilloscope, signal generator and transistor. The main features of this product are as follows

Environmental Requirements Precautions
Avoid high temperature, open flame, corrosive gas, humid or dusty environment to prevent equipment fa.
When installing the transistor on the equipment, make sure that the transistor socket is intact to avoid poor .
If you measure directly without discharging the tor, the machine will discharge the tor and generate sparks at the moment of insertion and locking. This feature only protects if the discharge is forgotten. If used correctly, it is recommended to discharge the tor manually before testing.
During non-measurement periods, the 123 locking connector is on and direct insertion of the battery is prohibited.
If the measured component parameters are outside the test range, the test result may show the wrong component type.
Strongly ic Devices: Prevents ic fields from interfering with the normal operation of the device.

Specifications:
1. Oscilloscope Parameters
Real-time sampling rate 48 MSa/s
ogue bandwidth: 10 MHz
Voltage protection: ±400V
Waveform storage: support screenshot saving and viewing, convenient for data ysis
Input impedance: 1MΩ
Coupling mode: AC/DC AC/DC
Test Voltage Range 1:1 Probe 80Vpp (+40V)
Probe 10:1: 800 Vpp (+400V)
Vertical Sensitivity: 10 mV/div~10 V/div (X1 range)
Vertical Offset: Adjustable with indication
Time base range: 50 ns ~ 20 s 50 ns ~ 20 s
Trigger Mode: Auto/Normal/Single
Trigger Type: Rising Edge, Falling Edge
Trigger Level: Adjustable, with indication
Waveform ze Yes (Hold function)
Automatic measurement Maximum, minimum, average, RMS, Vpp, frequency, period, duty cycle

2、Component tester parameters:
Transistor test: Support
Diode test: direct voltage drop <5V
Zener Diode Test: 0.01 ~ 4.5 V
Field Effect Transistor (FET) Test: JFET, IGBT, MIOSTET
Unidirectional SCR Test: Trigger Voltage <5V, Gate Level
Bidirectional SCR Test: Trigger t <6 mA
tor Test: 25pF ~ 1000 μF
Resistance Test: 0.01 Ω ~ 50 MΩ
Inductor Test: 10 μH ~ 1000 μH
DS18B20 Test: Support
DHT11 Test: Support

3. Signal Generator Parameters:
Output Waveforms Support 13 kinds of waveform outputs.
Waveform Frequency 0-50 KHz
Square Duty Cycle 0-100% Waveform Amplitude 0-100% Waveform Amplitude 0-100% Waveform Amplitude 0-100% Waveform Amplitude 0-100% Waveform Amplitude
Waveform amplitude 0.1V-3.0V

4、Basic Parameters
Model: DSO-TC4
Language: English, German, Portuguese, Spanish, Tuju, pyccки©.
Display: 2.8-inch TFT colour display
Backlight: adjustable brightness
Power supply Type C (5 V/1 A).
Battery: 3.7 V/1500 mAh
Dimensions: ≈90×142×27.5 mm
Product weight: ≈186 g

Packing list:
1 x Main unit DSO-TC4
3 x Test Hook
1 x Probe P6100
1 x Adaptor
1 x Probe with alligator clips 
1 x Data Cable
1 x User Manual