Pezzetti Aluminium Moka Espresso Coffee Maker-9 Cup

Make your own esppresso’s at home with this classic stove top coffee maker from Pezzetti. Pezzetti was founded in the 40’s by Ezio Pezzetti and are still made today in the same design. They are a classic timeless design.

• Body made from top quality aluminium alloy


• Made in Italy


• Stay-in-cool Bakelite handle and knob


• Safety Valve


• Multi cooktop compatible


• Ergonomically designed


• Hand wash in warm water only


• Care and use Instructions included


• 1 cup = approx. 60ml of espresso coffee  

How to make the perfect espresso.

Fill the boiler (marked A in the diagram) with water almost up to the  safety release valve and insert the funnel-shaped metal filter (B). Add  finely-ground coffee to the filter as shown below. Tightly screw the upper part  (C, which has a second metal filter at the bottom) onto the base. Place the pot  on a suitable heat source, bring the water to its boiling point, and thereby  create steam in the boiler.

A gasket ensures a tightly closed unit and allows for pressure to safely  build up in the lower section, where a safety valve provides a necessary release  in case this pressure should get too high (with clean filters, that should not  happen). For best results, fill up the entire filter with coffee and place over  medium to medium-high heat.

The steam eventually reaches a high enough pressure to gradually force  the surrounding boiling water up the funnel through the coffee powder and into  the upper chamber ©, where the coffee is collected. When the lower chamber is  almost empty, steam bubbles mix with the upstreaming water, producing a  characteristic gurgling noise.

As with percolators, the pot should not be left on the stove so long  that the coffee boils. Ideally, with a little practice, it should be removed  from the heat before it actually starts gurgling – usually, when only  about half of the top chamber has been filled.

The bottom chamber (A) contains water. When heated, steam pressure  pushes the water through a basket containing ground coffee (B) into the  collecting chamber ©.

INFOMATION

Your coffee maker begins to work when heat is applied to the base causing heat to build up in the lower chamber. (Many believe that the water begins to rise only when the water reaches boiling point however this is not the case). It actually works by heating the air causing it to expand and force the water through the funnel and into the upper chamber. This begins to occur at a temperature of 500C and will end at a temperature of 900C. The end result is a perfect coffee at 700C which, depending on the heat source, will be brewed in approximately 5 – 10 minutes.

Pezzetti are able to achieve this temperature by creating the ideal pressure and temperature in the lower chamber. Many imitation units are unable to achieve this ideal temperature and therefore burn the coffee before reaching the upper chamber. The end result is a burnt and bitter coffee.

TIPS and TRICKS 

• For the first use, discard the coffee as it will help to eliminate foreign particles and production odours.


• Pezzetti uses only heat resistant handles, however these handles are not flame proof therefore avoid heating on high flame as it may damage the handle.


• Any type of coarse ground espresso coffee can be used. Do not use instant coffee, cocoa, fine ground coffee, or flavour extracts.


• Do not use abrasive soaps, powders or steel wool products. Never wash your percolator in the dishwasher, as it may alter the aluminium surface. For cleaning simply use water.


• Never use your coffee maker without water.


• Store away only after all items are dry to avoid calcium build up.